Flontech USA LLC
Flontech USA LLC
100 Thompson Street
Pittston, PA 18640
Phone: 866.654.2676
Fax: 570.654.5759
Email: info@flontechusa.com
Website: www.flontechusa.com
Print Back
The information contained in this technical data sheet is based on our experience to date and we believe it to be reliable. It is intended only as a guide for use at your risk and discretion. We can not guarantee favorable results and assume no liability in connection with its use or the use of the products described. None of this information is to be taken as a license to operate under, or a recommendation to infringe any existing patents. Prior to any application the above product has to be tested and accepted by the processor.

In order to complete this data sheet, you can ask us for a DSC-TGA analysis and for a microscope photo.
Unit of Measure

Specifications

Composition

 N/A 75% Virgin PTFE + 25% Clean Milled Glass Fibers, Inclusive Black Pigment

Specific Gravity

 N/A 2.22 - 2.26 g/cm³

Tensile Cross Direction

 N/A 3,000 psi

Elongation Cross Direction

 N/A 240 %

Hardness

 N/A 66 - 62 Shore D

Bulk Density

 N/A 600 - 700 g/lt

Shrink Diameter

 N/A 1.0 - 2.0 %

Flow

 N/A 4 sec/50 g

Flow Stability

 N/A 4 sec/50 g

Average Particle Size

 N/A 450 - 550 Micron

Recommended Molding Pressure

 N/A 7,200 psi

Max. Sintering Temperature

 N/A 707 ºF