Flontech USA - 80% Virgin PTFE + 20% Hard Carbon Powder

The information contained in this technical data sheet is based on our experience to date and we believe it to be reliable. It is intended only as a guide for use at your risk and discretion. We can not guarantee favorable results and assume no liability in connection with its use or the use of the products described. None of this information is to be taken as a license to operate under, or a recommendation to infringe any existing patents. Prior to any application the above product has to be tested and accepted by the processor.

In order to complete this data sheet, you can ask us for a DSC-TGA analysis and for a microscope photo.

Unit of Measure

Items	FLON-1133 Non Free Flow	TBA Semi Free Flow	TBA Free Flow	FLON-1132 Semi Presintered	TBA Presintered
Composition	N/A 80% Virgin PTFE + 20% Hard Carbon Powder
Specific Gravity	N/A 2.08 - 2.12 g/cm³
Tensile Cross Direction	N/A 2,900 psi	N/A 2,600 psi	N/A 2,400 psi	N/A 2,100 psi	N/A 2,100 psi
Elongation Cross Direction	N/A 130 %	N/A 100 %	N/A 90 %	N/A 70 %	N/A 70 %
Hardness	N/A 70 - 65 Shore D
Bulk Density	N/A	N/A 500 - 600 g/lt	N/A 550 - 650 g/lt	N/A 650 - 750 g/lt	N/A 650 - 750 g/lt
Shrink Diameter	N/A 1.75 - 2.75 %
Flow	N/A	N/A 4 sec/50 g	N/A 3 sec/50 g	N/A 2 sec/50 g	N/A 2 sec/50 g
Flow Stability	N/A	N/A 4 sec/50 g	N/A 3 sec/50 g	N/A 2 sec/50 g	N/A 2 sec/50 g
Average Particle Size	N/A	N/A 450 - 550 Micron	N/A 550 - 650 Micron	N/A 500 - 600 Micron	N/A 500 - 600 Micron
Recommended Molding Pressure	N/A 3,200 psi	N/A 4,200 psi	N/A 4,200 psi	N/A Extrusion	N/A Extrusion
Max. Sintering Temperature	N/A 716 ºF